visualSound
Well-known member
Hey everyone, I've been a huge fan of the teensy for years as a pixel controller and I wanted to tell you all about some pixel mapping software I've just publicly released that officially supports the teensy 3.1 as a pixel controller preset.
GeoPix is a piece of software dedicated purely to Pixel Mapping and VJ'ing, with a large amount of flexibility through some of it's other tools. I've been developing GeoPix for the last year on and off and been experimenting with leds and pixel mapping for twice that.
GeoPix is currently available as a full piece of software but as an Open Beta.
In it's inactivated state, GeoPix is still fully functional, the outputs to led's will go dark for 30 seconds every 3 minutes, that is the only limitation. email me through my website if you want a beta activation code for some sort of larger project!
Download GeoPix, see the full Getting Started Guide here:
http://www.enviral-design.com/geopix/geopix-led-pixel-mapper/
See the entire video tutorial series for it here:
https://www.youtube.com/playlist?list=PLmleeAYFzdn3hal8OaCj458bi2-vpO1Ho
The GeoPix Lighting Solution : From A to Z (YouTube)
VJ'ing with GeoPix : LED Pixel Mapped Arch (YouTube)
This above video was done with 3 teensys working together to control the arch system over a multi-tt hub.
I've put together the files and a programming guide for the teensy 3.1 to make it directly compatible with GeoPix as a simple pixel controller.
Very simple code but it mixes fastLED and the octows2811 library to achieve 400 pixels per each of 8 strips capable of 60 fps.
[url]http://www.enviral-design.com/geopix/geopix-getting-started/teensy-3-1-arduino-guide/[/url]
Thanks!
Lucas
GeoPix is a piece of software dedicated purely to Pixel Mapping and VJ'ing, with a large amount of flexibility through some of it's other tools. I've been developing GeoPix for the last year on and off and been experimenting with leds and pixel mapping for twice that.
GeoPix is currently available as a full piece of software but as an Open Beta.
In it's inactivated state, GeoPix is still fully functional, the outputs to led's will go dark for 30 seconds every 3 minutes, that is the only limitation. email me through my website if you want a beta activation code for some sort of larger project!
Download GeoPix, see the full Getting Started Guide here:
http://www.enviral-design.com/geopix/geopix-led-pixel-mapper/
See the entire video tutorial series for it here:
https://www.youtube.com/playlist?list=PLmleeAYFzdn3hal8OaCj458bi2-vpO1Ho
The GeoPix Lighting Solution : From A to Z (YouTube)
VJ'ing with GeoPix : LED Pixel Mapped Arch (YouTube)
This above video was done with 3 teensys working together to control the arch system over a multi-tt hub.
I've put together the files and a programming guide for the teensy 3.1 to make it directly compatible with GeoPix as a simple pixel controller.
Very simple code but it mixes fastLED and the octows2811 library to achieve 400 pixels per each of 8 strips capable of 60 fps.
[url]http://www.enviral-design.com/geopix/geopix-getting-started/teensy-3-1-arduino-guide/[/url]
Thanks!
Lucas