bendedavis
Member
I'm building a product that uses the Teensy LC chip. The first prototype used a Teensy LC board directly on the back of the main PCB. The current board integrates the chips from the Teensy LC in my board. I bought the MKL02 chip from PJRC and a MKL26Z64VFT4 from Digikey. My computer is not seeing the Teensy at all over USB. One thing that seemed a bit unclear from the schematic was the crystal. I'm using an EPSON TSX-3225 16.0000MF09Z-AC3 with 2 9pF caps. Has anyone else here used the Teensy LC schematic in there own design? I'd appreciate any help you can offer, thanks.