I've had a look around, but can't see anyone referring to reading TPMS signals into an arduino-based device.
I'm investigating it as an element of my existing project that monitors the Engine Control Unit of an old (pre-ODBII van).
I'd like to have my teensy configure a TPMS receiver and accept values from the tyre pressure values when they have been received.
What would be involved to use a receiver chip such as this Atmel ATA5746C?
http://www.mouser.com/ds/2/36/atmel-9249-car-access-ata5745c-ata5746c_datasheet-365601.pdf
Are there any projects out there that do something similar??
I'm investigating it as an element of my existing project that monitors the Engine Control Unit of an old (pre-ODBII van).
I'd like to have my teensy configure a TPMS receiver and accept values from the tyre pressure values when they have been received.
What would be involved to use a receiver chip such as this Atmel ATA5746C?
http://www.mouser.com/ds/2/36/atmel-9249-car-access-ata5745c-ata5746c_datasheet-365601.pdf
Are there any projects out there that do something similar??