Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: numlock and capslock LED

  1. #1
    Junior Member
    Join Date
    Aug 2016
    Posts
    1

    numlock and capslock LED

    I've been fixing up an old dead IBM model F AT keyboard and I've used a different controller to make it work, but it had 2 different boards inside of it originally. One for LEDs, and one for the rest of the board.

    The board that controlled the LEDs is also dead/destroyed and the controller I'm using now connected to that thing to light up the LEDs.

    I know the teesny can act as a keyboard, but I just want it to light LEDs when I push capslock scrolllock and numlock.

    Can anyone point me in the right direction, or give me some code and what I would need to solder? I actually have some LEDs here and a Teesny 2.0 ready to test.

    My plan is to just make a bracket to hold the LEDs in the right spots and hook the teensy to a USB hub I have inside the keyboard where I also have some storage! (There is a lot of room in the top part of this keyboard)

    Thank you!

  2. #2
    Senior Member
    Join Date
    Apr 2013
    Posts
    1,899
    Looks like some example code is here:
    https://forum.pjrc.com/threads/25368...al-from-the-PC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •