Teensy loader not recognizing Teensy 3.2

Status
Not open for further replies.
D

dlr

New member
Hello,

I plug in the Teensy 3.2 to the PC and the orange light blinks. I open Teensy Loader and press the button, the orange light disappears and Teensy Loader doesn't recognize the Teensy. I've tried reseting the PC, pluging the Teensy while pressing the button, changing USB cable, port... everything I read that could affect.
What can I do so Teensy Loader recognizes y Teensy 3.2?

Thanks
 
Make sure you are not using a 'charge only' USB cable.

On Teensy.exe Loader Menu is 'Help' - under Help is 'Verbose Info'. Open that and it will indicate when a Teensy is detected by the computer. If it doesn't indicate a device, especially when pushing the 'Program' button - it won't be able to program it.
 
I've used this cable to transfer data, I'm not sure if that's what you mean by not a 'charge only'.

This is the 'Verbose Info'
04:34:59: Teensy Loader 1.21, begin program
04:34:59: Listening for remote control on port 3149
04:34:59: initialized, showing main window
04:34:59: HID/win32: vid:04D9 pid:A0F9 ver:0108
04:34:59: HID/win32: vid:04D9 pid:A0F9 ver:0108
04:34:59: HID/win32: vid:0951 pid:16A4 ver:0003
04:34:59: HID/win32: vid:0951 pid:16A4 ver:0003
04:34:59: HID/win32: vid:04D9 pid:A0F9 ver:0108
04:34:59: HID/win32: vid:0951 pid:16A4 ver:0003
04:34:59: HID/win32: vid:04D9 pid:A0F9 ver:0108
04:35:00: Verbose Info event
04:35:10: Verbose Info event

I opened the Teensy Loader before plugin in the Teensy and I pressed the button. No lines were added since I pluged the Teensy.
 
What type of setup? Windows? 32 or 64 bit? What OS? Also which version of Arduino and Teensyduino?

For example if you are running Linux, then the next question would be, did you install the udev rule file as shown in the instructions?
http://www.pjrc.com/teensy/td_download.html

But I am guessing Windows from the win32... mentioned in verbose...
 
Status
Not open for further replies.
Back
Top