Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: MKL26Z64VLH4 64 pin LQFP IC with teensy LC

  1. #1
    Junior Member
    Join Date
    Oct 2016
    Posts
    2

    MKL26Z64VLH4 64 pin LQFP IC with teensy LC

    Hi All,
    I am using MKL26Z64VLH4 64 pin LQFP IC for my project. I need to know whether I can use MINI 54 pre programmed IC for teensy LC to program.
    If yes how to enable pins which are not defined in teensy LC schematics such as PTB18 PTB19 etc. Can I also use the 4 ADC available in the IC to configure in a differential mode as in teensy 3.1. Please suggest.

  2. #2
    Im going to bump this thread instead of making a new one.

    Can the MKL26Z64VLH4 be used in place of the QFN version? And there will be no issue with the MKL04Z32 Bootloader?

  3. #3
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,169
    I do not know. It might work. In fact, odds are pretty good it'll work. But that chip isn't officially supported and hasn't been tested, so it might not work. If it doesn't work, I can tell you 1 thing with certainty: PJRC will not alter the bootloader to support it.

    If you do try this, I recommend building just 1 or 2 test prototypes to confirm whether it works.

  4. #4
    Quote Originally Posted by PaulStoffregen View Post
    PJRC will not alter the bootloader to support it.
    .
    Well not without a generous donation right?

    Ok ill give it a shot. Ideally I would hope it works exactly the same since i want to prototype with LQFP and production will be QFN.

    Excellent community support as always Paul!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •