3.6 not showing a port

[Reefhermit]

Downloaded the latest Teensyduino and installed to Arduino IDE. The 3.6 can be selected but no port is available.
It does show as a connected device on the Windows 10 "Other Devices" as Teensyduino RAWHID?

Any advice would be appreciated.

Thanks,

Ken

 

[defragster]

Port shows for a device online when sketch uploaded has USB/SERIAL

Perhaps try TYQT - (forum search)

 

[Frank B]

Change the USB-Type to serial and upload a sketch.

 

[Reefhermit]

Port shows for a device online when sketch uploaded has USB/SERIAL

Perhaps try TYQT - (forum search)

If I change to 3.2 with this sketch the port becomes available!

 

[Reefhermit]

The serial IS selected . . .

 

[Frank B]

Yes but did you upload a sketch ??

The default "blink" has serial not enabled, so a new Teensy *never* shows a serial Port.

 

[Reefhermit]

Ok, that works . . Thanks!

 

[defragster]

If I change to 3.2 with this sketch the port becomes available!

In agreement with Frank - it seems it works as designed when you upload a USB\SERIAL enabled sketch.

The IDE SerMon won't show a port for HID or other types not explicitly USB/Serial.