drjohnsmith
Well-known member
I'm having problems with usb_configured on a new teensy 3.2 project.
Have boiled it down to a simple test code,
the usb_serial_avaialble() does not cause an error , but the usb_configured causes a error, "it was not defined "
arduino 1.6.9 and teensduino 1.3
Thoughts please ?
void setup()
{
Serial.begin(9600); // USB is always 12 Mbit/sec
}
void loop()
{
Serial.println("Hello World...");
usb_serial_available();
usb_configured();
delay(1000); // do not print too fast!
}
Have boiled it down to a simple test code,
the usb_serial_avaialble() does not cause an error , but the usb_configured causes a error, "it was not defined "
arduino 1.6.9 and teensduino 1.3
Thoughts please ?
void setup()
{
Serial.begin(9600); // USB is always 12 Mbit/sec
}
void loop()
{
Serial.println("Hello World...");
usb_serial_available();
usb_configured();
delay(1000); // do not print too fast!
}