SimonWakley
Active member
Hi, Is here any advantage using HardwareSerial over just using the straight SerialN I only need standard 8N1 and I can assign the pins to the alt serial posts as needed. Thanks.
Teensy3.6 I have ethernet and 4 serial ports working, mostly just curious.
#define RS232B Serial1
//HardwareSerial RS232B = HardwareSerial(); // Set up for using secondary Serial 1 pins 26&27
Teensy3.6 I have ethernet and 4 serial ports working, mostly just curious.
#define RS232B Serial1
//HardwareSerial RS232B = HardwareSerial(); // Set up for using secondary Serial 1 pins 26&27