BabySpinach
Active member
Hello all!
I am attempting to interface the following display with my Teensy 3.6:
Link to datasheets and specs:
http://www.sainsmart.com/sainsmart-...800-arduino-due-mega2560-r3-raspberry-pi.html
The backlight will be powered externally.
I've tried copying the exact pinout pins from the Duo library, (16 data pins, etc) but I just get a black screen when I turn it on and try to run the demo code.
I did find this one single GitHub reference for Teensyduino files:
https://github.com/Alkorin/teensyduino/tree/master/libraries/UTFT/tft_drivers/ssd1963/800
How would I go about finding out which pins should be connected to what?
I don't mind doing the dirty work and learning, I just need help getting started in what to edit to get this display working on my teensy. What specific pins is this driver looking for connections on and how would I manipulate that or find that information out?
Thank you for any help.
I am attempting to interface the following display with my Teensy 3.6:
Link to datasheets and specs:
http://www.sainsmart.com/sainsmart-...800-arduino-due-mega2560-r3-raspberry-pi.html
The backlight will be powered externally.
I've tried copying the exact pinout pins from the Duo library, (16 data pins, etc) but I just get a black screen when I turn it on and try to run the demo code.
I did find this one single GitHub reference for Teensyduino files:
https://github.com/Alkorin/teensyduino/tree/master/libraries/UTFT/tft_drivers/ssd1963/800
How would I go about finding out which pins should be connected to what?
I don't mind doing the dirty work and learning, I just need help getting started in what to edit to get this display working on my teensy. What specific pins is this driver looking for connections on and how would I manipulate that or find that information out?
Thank you for any help.