Using the teensy on can bus

Status
Not open for further replies.
Use 83333, according to my ESP32 driver calculation, that is closer to the rate you want when I inputted 83300

another user has a problem using 95000, when I used the driver calculation return formula, the rate of choice was 95238, and he was good to go :)
 
yes that solved my problem, it works perfectly fine with 83333 kbits. Now use your code and everything is running smooth, can't thank you enough for your hard work.

This is the TJA1055/3 breakout board i buyed on ebay

bild1.jpg

- VCC + BAT + WAKE are short-circuited to +5v and buffered with 100nF
- STB, EN set to HIGH with 10k (each) to +5v
- RTH, RTL 5.6k (each) termination (allowed: 500 < 6k)
- CANH, CANL 150 pF (each) capacitor

EVERYTHING ON BOARD
https://www.ebay.de/sch/bigpie83/m.html

bild5.png
 
Status
Not open for further replies.
Back
Top