I'm having difficulty compiling code to my teensy 3.2
Here's the error I'm recieving from the Arduino IDE
Here's the code it's compiling:
Any help would be greatly appreciated!
Thanks,
-Doug Jr.
Here's the error I'm recieving from the Arduino IDE
Code:
Arduino: 1.8.1 (Windows 10), TD: 1.35, Board: "Teensy 3.2 / 3.1, Serial + Keyboard + Mouse + Joystick, 96 MHz (overclock), Fast, US English"
exec: "D:\\Arduino181\\hardware\\teensy/../tools//teensy_post_compile": file does not exist
Error compiling for board Teensy 3.2 / 3.1.
Here's the code it's compiling:
Code:
int redPin = 14;
void setup() {
Serial.begin(38400);
pinMode(7, INPUT);
pinMode(8, INPUT_PULLUP);
pinMode(redPin, OUTPUT);
}
void loop()
{
Keyboard.begin();
if (digitalRead(7) == HIGH) {
Serial.println("AAA Button is not pressed...");
} else {
Serial.println("AAA Button pressed!!!");
//turn on the light a bit
digitalWrite(redPin, HIGH);
// adding an artificial delay to begin with
delay(3000);
Keyboard.print("Hello There!");
delay(500);
//turn off the light
digitalWrite(redPin, LOW);
}
if (digitalRead(8) == HIGH) {
Serial.println("BBB Button is not pressed...");
} else {
Serial.println("BBB Button pressed!!!");
//turn on the light a bit
digitalWrite(redPin, HIGH);
// make it wait just a little bit
delay(1500);
Keyboard.print("How's it going?");
delay(1000);
//turn off the light
digitalWrite(redPin, LOW);
}
delay(500);
}
Any help would be greatly appreciated!
Thanks,
-Doug Jr.
Last edited: