Forgive this very basic question, but i just got a teensy 3.6 with the intention of building a midi controller. Just for a sanity check i wanted to make sure i was able to blink the LED via my DAW by sending it midi data. I sent it a F#3 note as that is note 42 to blink the LED according the example Midi_basic_IO sketch included with teensyduino. I was unable to get it to blink.
Thinks i made sure of
-made sure midi libraries were installed
-made sure sketch uploaded correctly
-selected USB type: midi when uploading sketch
-made sure teeny midi showed up in DAW
-checked with every note and 127 velocity
-checked midi monitor to make sure notes are being sent
Im left scratching my head, i feel like something is going past me. Is this example sketch not meant to blink the LED via USB? This is making me feel green with teensys
Thinks i made sure of
-made sure midi libraries were installed
-made sure sketch uploaded correctly
-selected USB type: midi when uploading sketch
-made sure teeny midi showed up in DAW
-checked with every note and 127 velocity
-checked midi monitor to make sure notes are being sent
Im left scratching my head, i feel like something is going past me. Is this example sketch not meant to blink the LED via USB? This is making me feel green with teensys
Last edited: