Teensy 3.2 eagle cad project file with connection holes

[jrdarrah]

I'm going to make a small PCB that will need to plug into the pins along the perimeter of the Teensy 3.2 as well as some of the extra ones near the USB connector like VUSB, AREF, A10, A11, A13. I'm hoping to use an existing eagle project file with only the connectors defined that will be my starting point for my new board so all of the pins will line up with the ones on the Teensy. Does any one have a bare bones eagle project file that they would be willing to share?

 

[madmattd]

Check through Constantin's library, you might find one that does what you want.