lerxstrulz
Well-known member
Hi All,
I have a Teensy 3.2 soldered to an Audio Connector that was working fine until yesterday. I was uploading a change to the sketch, and right before it finished uploading the LED went off and since then the IDE does not see the Teensy and the LED does not come on when plugged in to power and the sketch does not start.
It's not the sketch I have another exact setup and that one is working just fine with the new sketch. Things I have tried:
- different USB cables
- different laptop
- 5V battery
- holding the programming button while connecting
The weird thing is, it's definitely getting power because I have a peripheral attached to it that powers on just fine whenever I plug the Teensy into the laptop. It just can't see the serial port and nothing else happens.
Any ideas? What else to try? Any other details I can provide? Thanks in advance!
I have a Teensy 3.2 soldered to an Audio Connector that was working fine until yesterday. I was uploading a change to the sketch, and right before it finished uploading the LED went off and since then the IDE does not see the Teensy and the LED does not come on when plugged in to power and the sketch does not start.
It's not the sketch I have another exact setup and that one is working just fine with the new sketch. Things I have tried:
- different USB cables
- different laptop
- 5V battery
- holding the programming button while connecting
The weird thing is, it's definitely getting power because I have a peripheral attached to it that powers on just fine whenever I plug the Teensy into the laptop. It just can't see the serial port and nothing else happens.
Any ideas? What else to try? Any other details I can provide? Thanks in advance!