To connect power socket

Status
Not open for further replies.

tensian

Member
I have been reading about how to put external feed in teensy, but I do not have it clear at all ...
I think option 3 here .. http://www.pjrc.com/teensy/external_power.html
Allows me to use the USB power (that is to say, I can still feed the screen I have connected) or the external or both at the same time and the teensy will choose, in the latter case.
is this correct?
In the drawing of the link appears a teensy different from mine, I have the 3.6 and the truth is that I do not know how to do it.
I made a drawing of how I think it is, but it is quite possible that this bad , someone could confirm it.
regards

conexion.jpg
 
You need to connect it like this (and cut the VIN VUSB pad):
pXrGO3s.png
The picture shows a Teensy 3.2 but it's the same for Teensy 3.6
 
Thank you very much HWGuy
I could confirm that after doing this I will be able to continue using the usb only to continue feeding all the components (screen, sdcard, ect), without the need for external power.
 
Status
Not open for further replies.
Back
Top