I'm sorry if this question is answered somewhere else, I tried looking for the answer and could not find it.
I am trying to port over some code I wrote for the Arduino Diecimilia and in the code i use I2C and the 2wire.h library to communicate with a parallax OFN Module (part number 27903). To do that with the Diecimilia I connect two of the OFN pins (CLK and SDA) to ANALOG IN pin 4 and 5 of the Diecimilia. I don't see any pins on the Teensy marked "ANALOG IN". Which pins on the Teensy work as analog in, or, which pins should I use on the Teensy for I2C communication?
Thank you
I am trying to port over some code I wrote for the Arduino Diecimilia and in the code i use I2C and the 2wire.h library to communicate with a parallax OFN Module (part number 27903). To do that with the Diecimilia I connect two of the OFN pins (CLK and SDA) to ANALOG IN pin 4 and 5 of the Diecimilia. I don't see any pins on the Teensy marked "ANALOG IN". Which pins on the Teensy work as analog in, or, which pins should I use on the Teensy for I2C communication?
Thank you