sumotoy
Well-known member
Hi guys,
after very long time it's nice to be here again and say hello to everybody using my hands again.
after long time and long disease I finally get out, only sad for lost my mother in maintime... but I'm well and my wife and son perfect so I'm happy, really.
Anyway, I was freaking out to continue play with Teensy's (expecially new ones), I left everithing around end of April last year and
almost disappeared from the entire web till now.
I decided to buy a new computer and notebook for the big event, both Intel Win 10, brand new and with latest win 10/64.
Installed arduino 1.8.2
Installed Teensyduino 1.36
Connected a Teensy 3.2, it installed driver as usual, upped blink, pressed the reset and Teensy Loader correctly upped (and driver updated).
On Arduino IDE Teensy serial appear as COM 8 (Teensy)
I changed delay in blink program and upped again, IDE says 'Done uploading', Teensy Loader verbose as follow:
'
00:03:10.633: remote connection opened
00:03:10.634: remote cmd: "comment: Teensyduino 1.36 - WINDOWS (teensy_post_compile)"
00:03:10.634: remote cmd: "status"
00:03:10.634: status data sent
00:03:10.634: remote cmd: "dir:C:\Users\UNCINE~1\AppData\Local\Temp\arduino_build_620849\"
00:03:10.635: remote cmd: "file:Blink.ino.hex"
00:03:10.638: File "Blink.ino.hex". 14464 bytes, 6% used
00:03:10.644: remote cmd: "status"
00:03:10.644: status data sent
00:03:10.655: remote connection closed
00:03:10.717: remote connection opened
00:03:10.717: remote cmd: "comment: Teensyduino 1.36 - WINDOWS (teensy_post_compile)"
00:03:10.717: remote cmd: "status"
00:03:10.717: status data sent
00:03:10.717: remote cmd: "dir:C:\Users\UNCINE~1\AppData\Local\Temp\arduino_build_620849\"
00:03:10.717: remote cmd: "file:Blink.ino.hex"
00:03:10.717: File "Blink.ino.hex". 14464 bytes, 6% used
00:03:10.727: remote cmd: "status"
00:03:10.727: status data sent
00:03:10.747: remote connection closed
00:03:14.397: Verbose Info event
'
Looks everything good but... it doesn't up anything!!!
If I remember well, it should reboot but this not happen and the program bar doesn't appear, it works only if I manually press 'reset' button on Teensy.
I tried give full access to Arduino IDE and Teensy Loader in Winwos Firewall (I don't use any antivirus on both computer),
tried give Admin privileges to Arduino IDE and all Teensyduino programs, nothing, I have to manually press reset every time, really annoying.
Tried with 5 different Teensy 3.2 and 2 x Teensy 3.6, same thing.
Ok, maybe it's the computer? Tried on notebook and was very surprised, same results.
Oh, well, time to read troubleshooting page but appear all ok, I'm using Teensy from the very firs time and never a problem.
Another strange thing, I have turned off the AUTO button on Teensy Loader, in verbose appear 'Auto mode: disabled', but upping a sketch cause the button enabled itself again and doesn't stay off, weird on verbose this not appear.
Just to be sure, I've changed the cable a couple of times, nothing changed. My computers uses almost USB 3.0 or 3.1 only, can be that (stupid question, how can be?) ?
I have missed something? This is my first question, any suggestion to get it work as it should?
For second question, I have noticed the new Optimize menu on IDE, I know it will take eons to talk about what changed and I'm not asking a detailed explain but some library doesn't work or work really bad (data returned is bad, I'm sure it's something related to variable and declarations that should be volatile, etc),
I'm just asking witch is the 'legacy' optimization used until last year, by default IDE goes to 'fastest' but I'm sure it's not the legacy one.
Thanks in advance for help guys nice to be here and thanks for the amount of massive work to everyone, Teensy rocks!
after very long time it's nice to be here again and say hello to everybody using my hands again.
after long time and long disease I finally get out, only sad for lost my mother in maintime... but I'm well and my wife and son perfect so I'm happy, really.
Anyway, I was freaking out to continue play with Teensy's (expecially new ones), I left everithing around end of April last year and
almost disappeared from the entire web till now.
I decided to buy a new computer and notebook for the big event, both Intel Win 10, brand new and with latest win 10/64.
Installed arduino 1.8.2
Installed Teensyduino 1.36
Connected a Teensy 3.2, it installed driver as usual, upped blink, pressed the reset and Teensy Loader correctly upped (and driver updated).
On Arduino IDE Teensy serial appear as COM 8 (Teensy)
I changed delay in blink program and upped again, IDE says 'Done uploading', Teensy Loader verbose as follow:
'
00:03:10.633: remote connection opened
00:03:10.634: remote cmd: "comment: Teensyduino 1.36 - WINDOWS (teensy_post_compile)"
00:03:10.634: remote cmd: "status"
00:03:10.634: status data sent
00:03:10.634: remote cmd: "dir:C:\Users\UNCINE~1\AppData\Local\Temp\arduino_build_620849\"
00:03:10.635: remote cmd: "file:Blink.ino.hex"
00:03:10.638: File "Blink.ino.hex". 14464 bytes, 6% used
00:03:10.644: remote cmd: "status"
00:03:10.644: status data sent
00:03:10.655: remote connection closed
00:03:10.717: remote connection opened
00:03:10.717: remote cmd: "comment: Teensyduino 1.36 - WINDOWS (teensy_post_compile)"
00:03:10.717: remote cmd: "status"
00:03:10.717: status data sent
00:03:10.717: remote cmd: "dir:C:\Users\UNCINE~1\AppData\Local\Temp\arduino_build_620849\"
00:03:10.717: remote cmd: "file:Blink.ino.hex"
00:03:10.717: File "Blink.ino.hex". 14464 bytes, 6% used
00:03:10.727: remote cmd: "status"
00:03:10.727: status data sent
00:03:10.747: remote connection closed
00:03:14.397: Verbose Info event
'
Looks everything good but... it doesn't up anything!!!
If I remember well, it should reboot but this not happen and the program bar doesn't appear, it works only if I manually press 'reset' button on Teensy.
I tried give full access to Arduino IDE and Teensy Loader in Winwos Firewall (I don't use any antivirus on both computer),
tried give Admin privileges to Arduino IDE and all Teensyduino programs, nothing, I have to manually press reset every time, really annoying.
Tried with 5 different Teensy 3.2 and 2 x Teensy 3.6, same thing.
Ok, maybe it's the computer? Tried on notebook and was very surprised, same results.
Oh, well, time to read troubleshooting page but appear all ok, I'm using Teensy from the very firs time and never a problem.
Another strange thing, I have turned off the AUTO button on Teensy Loader, in verbose appear 'Auto mode: disabled', but upping a sketch cause the button enabled itself again and doesn't stay off, weird on verbose this not appear.
Just to be sure, I've changed the cable a couple of times, nothing changed. My computers uses almost USB 3.0 or 3.1 only, can be that (stupid question, how can be?) ?
I have missed something? This is my first question, any suggestion to get it work as it should?
For second question, I have noticed the new Optimize menu on IDE, I know it will take eons to talk about what changed and I'm not asking a detailed explain but some library doesn't work or work really bad (data returned is bad, I'm sure it's something related to variable and declarations that should be volatile, etc),
I'm just asking witch is the 'legacy' optimization used until last year, by default IDE goes to 'fastest' but I'm sure it's not the legacy one.
Thanks in advance for help guys nice to be here and thanks for the amount of massive work to everyone, Teensy rocks!