I've got a RPi with a sensor. If the sensor receives a signal, the software on the RPi needs to send a signal to the Teensy, which in response will send a keystroke to a PC. Speed is no issue, it will not happen more than once in 2 seconds. The number of of different signals the teensy would need to 'understand' and forward to the HID is a max of 6 different signals.
sensor --> RPi --> Teensy --> PC
My question is how to connect this together without causing power issues (if any).
The RPi is powered via wall outlet adapter and connected using ethernet to a network. The RPi powers the sensor.
The Teensy would be used to do the HID commands. The Teensy will be powered by the host PC.
What would be the way to make the RPI send a signal to the Teensy? Can I simply connect their GPIO's and use those to send a signal to the Teensy? I was worried about the 2 different power supplies (1 from PC and 1 from a power outlet), do I need some isolation?
Any feedback appreciated!
sensor --> RPi --> Teensy --> PC
My question is how to connect this together without causing power issues (if any).
The RPi is powered via wall outlet adapter and connected using ethernet to a network. The RPi powers the sensor.
The Teensy would be used to do the HID commands. The Teensy will be powered by the host PC.
What would be the way to make the RPI send a signal to the Teensy? Can I simply connect their GPIO's and use those to send a signal to the Teensy? I was worried about the 2 different power supplies (1 from PC and 1 from a power outlet), do I need some isolation?
Any feedback appreciated!