BuffaloFan32
Well-known member
I have been using a 3.2 along with an Octo to control strips of WS2812s. I have had success driving about 1200 of them with a single 3.2 (8 strips of 150). There is a great tutorial for using that exact setup but I was wondering if there is anything similar for the new 3.5 and 3.6 boards that do not have an Octo adapter.
https://www.pjrc.com/teensy/td_libs_OctoWS2811.html
I still consider myself to be a novice so I like things to be broken down into small parts. My matrix is a lot bigger and will require multiple Teensy's so I was hoping I could drive more and longer strips with the new 3.5 or 3.6. Any suggestions on whether the 3.5 or 3.6 would work better with ws2812 LEDs?
https://www.pjrc.com/teensy/td_libs_OctoWS2811.html
I still consider myself to be a novice so I like things to be broken down into small parts. My matrix is a lot bigger and will require multiple Teensy's so I was hoping I could drive more and longer strips with the new 3.5 or 3.6. Any suggestions on whether the 3.5 or 3.6 would work better with ws2812 LEDs?