Seeking explanation of "5V tolerant" re Teensy 3.2

Status
Not open for further replies.

Involute

Member
Newb here. I'm considering the Teensy 3.2 to replace a Pro Trinket (5V) in an existing project. Can someone point me to an explanation of the term "5V tolerant" as it applies to the 3.2? Also, I've been unable to locate a datasheet, or even a pinout, for the part, so a pointer to those would also be appreciated. Thanks.
 
5v tolerant means the micro talks and controls gpios using 3.3v signals, but also accepts inputs of 3.3 to 5v as well, except on analog gpio pins, never use 5v there.
 
Status
Not open for further replies.
Back
Top