Hi.
I need to build a device that simultaneously takes 2x audio inputs, modifies them (instructions on EEPROM, SD-card or in FLASH) and outputs them to 2x audio outputs. So its kinda audio throughput device that modifies the audio stream in realtime in two directions:
in1 --> FUNC1--> out1
out2 <-- FUNC2 <-- in2
In my understanding, this is supported by the existing libraries with 1x Teensy 3.5/3.6 & 1x Audio Adaptor Board. Is this correct or do I need something else?
Is it possible to use BOTH provided SD-card slots simultaneously with this setup? Schematics:
https://www.pjrc.com/store/teensy3_audio.html
https://www.pjrc.com/teensy/schematic.html
I need to build a device that simultaneously takes 2x audio inputs, modifies them (instructions on EEPROM, SD-card or in FLASH) and outputs them to 2x audio outputs. So its kinda audio throughput device that modifies the audio stream in realtime in two directions:
in1 --> FUNC1--> out1
out2 <-- FUNC2 <-- in2
In my understanding, this is supported by the existing libraries with 1x Teensy 3.5/3.6 & 1x Audio Adaptor Board. Is this correct or do I need something else?
Is it possible to use BOTH provided SD-card slots simultaneously with this setup? Schematics:
https://www.pjrc.com/store/teensy3_audio.html
https://www.pjrc.com/teensy/schematic.html
Last edited: