I'm seeking information that will help me link the schematic with the board layout.
One of my Teensy 3.6 boards arrived missing a passive component (bare pads coated with solder).
It still appears to work fine, and I assume the missing element is a capacitor, but I can't tell what value. It's the component immediately inboard of pin 20, and it's slightly turquoise colored on one of my good boards. Here's a photo of the missing component (pads just to the left of the through-hole).
I've pored over the schematic, and I'm very grateful to have it, but it's not quite enough. I've tried to trace the board, but there are so many traces that go underneath parts and so many vias that I keep making missteps. There are no markings on the passives.
Has anybody got a picture or diagram of the board layout indexed to the schematic?
Thanks!!!!!
-- Craig
One of my Teensy 3.6 boards arrived missing a passive component (bare pads coated with solder).
It still appears to work fine, and I assume the missing element is a capacitor, but I can't tell what value. It's the component immediately inboard of pin 20, and it's slightly turquoise colored on one of my good boards. Here's a photo of the missing component (pads just to the left of the through-hole).
I've pored over the schematic, and I'm very grateful to have it, but it's not quite enough. I've tried to trace the board, but there are so many traces that go underneath parts and so many vias that I keep making missteps. There are no markings on the passives.
Has anybody got a picture or diagram of the board layout indexed to the schematic?
Thanks!!!!!
-- Craig
Last edited: