hello everyone , 2 questions i have today -
it seems like there is no pin that represents D10 in teensy 3.5 . i mean i'm using port manipulation and i need to send 12 bit information , my free port is D (others are occupied) so i cant find in the schematic any pin which is D10. hope i'm clear ...
second question is a follow-up, is there a way to manually adjust ports ? or just to adjust pins so they are joined together ?
the point is i receive input through several pins at the same time , the inputs form together a binary value and i need to manipulate it a little and send it forward as output . but if ,say , there isn't pin 10 in port D , i can't use the command GPIOD_PDOR = GPIOC_PDIR
so what is the alternative?
hope my question makes sense , appreciate your help !
it seems like there is no pin that represents D10 in teensy 3.5 . i mean i'm using port manipulation and i need to send 12 bit information , my free port is D (others are occupied) so i cant find in the schematic any pin which is D10. hope i'm clear ...
second question is a follow-up, is there a way to manually adjust ports ? or just to adjust pins so they are joined together ?
the point is i receive input through several pins at the same time , the inputs form together a binary value and i need to manipulate it a little and send it forward as output . but if ,say , there isn't pin 10 in port D , i can't use the command GPIOD_PDOR = GPIOC_PDIR
so what is the alternative?
hope my question makes sense , appreciate your help !