Legitimate Teensy 3.2?

Status
Not open for further replies.

tofuman

New member
I was just wondering if the attached is a legitimate Teensy 3.2

No LED's appear to come on when connected to USB or when programming although appears to work okay (except some issues with i2c).

Thanks.

WP_20170926_001.jpg
WP_20170926_002.jpg
 
I was just wondering if the attached is a legitimate Teensy 3.2

No LED's appear to come on when connected to USB or when programming although appears to work okay (except some issues with i2c).

Thanks.

On the PJRC Web page are high resolution pictures of all Teensies.
You can check easily yourself, if components and label type and location are identical.
 
Yes, that one is legit.

The markings on the crystal and bootloader chip are an exact match. Counterfeits also seem to have a thin annular ring on their pads, and the 9 pads you haven't soldered look like the thickness of the real Teensy 3.2.

Recently some very close-looking counterfeits have appeared, so it can be a challenge now to tell them apart by appearance. :(

The LED is never supposed to light when running the bootloader.
 
Status
Not open for further replies.
Back
Top