Hi. Umm well after some trainings on arduino i developed my ideas and felt the need of Speed and i saw that its not only the hardware side does the work but libraries also. When i was researching to choose a Teensy i saw a video in internet and its said that taking 750 fps with and arduino is light years away and in video a Teensy was doing it properly.
So i decided to get Teensy 3.6 . Now i have some questions and i would like to give u a little warning because here is a newbee who tries to understand all these articles and technical explainings which is Not in my mother language. So i wld request u to be soft to me .haha. ok here is the dealS;
Its all started when i was trying to learn to use multiple strands in my project and first i have seen the system which is named as Parallel Output. And then i saw a specific library written for this which is named as OctoWS2811.
1) its said only teensy 3.0 and 3.1 is compitable.. but i think thats about DMA channels. And teensy 3.6 has bunch of them and also i saw teensy 3.6 is used in picture demonstration of the octaws2811 adaptor so i guess teensy 3.6 is capable for octaws2811 library. Am i right?
2) And i want to ask if teensy hardware is compitable with libraries that i use with arduino. I use fastled library and maybe softwareserial... but do i have anything to concern about Compitability or anything i shld know ? Because i dont want to choose a wrong product..
3) i see that there is a special adaptor to use with octaws2811 library. Thats so nice.. what i think is this adaptor includes a level shifter and some resistors for better singals through the Cat6 cable.. so if i get teensy 3.6 and this adaptor and its all ok? Because teensy 3.6 has no 5V tolerant. But 3.5 has! So i am i right about teensy 3.6 and that adaptor? I ll need a level shifter? Thats adaptor dont have a level shfter? And also i saw that some resistors directlt soldered teensy for better signals. Resistors on the adaptor do same thing?
Thx for your interests.
So i decided to get Teensy 3.6 . Now i have some questions and i would like to give u a little warning because here is a newbee who tries to understand all these articles and technical explainings which is Not in my mother language. So i wld request u to be soft to me .haha. ok here is the dealS;
Its all started when i was trying to learn to use multiple strands in my project and first i have seen the system which is named as Parallel Output. And then i saw a specific library written for this which is named as OctoWS2811.
1) its said only teensy 3.0 and 3.1 is compitable.. but i think thats about DMA channels. And teensy 3.6 has bunch of them and also i saw teensy 3.6 is used in picture demonstration of the octaws2811 adaptor so i guess teensy 3.6 is capable for octaws2811 library. Am i right?
2) And i want to ask if teensy hardware is compitable with libraries that i use with arduino. I use fastled library and maybe softwareserial... but do i have anything to concern about Compitability or anything i shld know ? Because i dont want to choose a wrong product..
3) i see that there is a special adaptor to use with octaws2811 library. Thats so nice.. what i think is this adaptor includes a level shifter and some resistors for better singals through the Cat6 cable.. so if i get teensy 3.6 and this adaptor and its all ok? Because teensy 3.6 has no 5V tolerant. But 3.5 has! So i am i right about teensy 3.6 and that adaptor? I ll need a level shifter? Thats adaptor dont have a level shfter? And also i saw that some resistors directlt soldered teensy for better signals. Resistors on the adaptor do same thing?
Thx for your interests.