Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 6 of 6

Thread: [posted] Antenna Analyzer

Threaded View

  1. #1
    Junior Member
    Join Date
    Jul 2017

    [posted] Antenna Analyzer

    This antenna analyzer can be used to find out, at which frequencies a short-wave antenna is matched to the 50 Ohm impdedance of the cable and the transceiver. This behaviour is presented by the so called "voltage standing wave ratio (VSWR)". To get this value for a frequency range, a Teensy 3.5 controls a DDS (Direct digital synthesizer) signal generator, which sweeps frequencies between 100kHz and 30 MHz. The hf voltages on the signal generator and at the antenna under test are read by the Teensy and compiled by some calculations to derive the VSWR values. The results are shown on a TFT touch display.
    Due to the fast processing speed and the huge amount of program memory, it is possible to create different pages on the TFT display, showing real-time measurements and other information.
    Details of the project can be found on my homepage.

    Click image for larger version. 

Name:	module2.jpg 
Views:	315 
Size:	73.0 KB 
ID:	11693 Click image for larger version. 

Name:	module1.jpg 
Views:	222 
Size:	70.4 KB 
ID:	11694Click image for larger version. 

Name:	page1.jpg 
Views:	171 
Size:	141.7 KB 
ID:	11697Click image for larger version. 

Name:	page2.jpg 
Views:	171 
Size:	122.8 KB 
ID:	11695 Click image for larger version. 

Name:	page4.jpg 
Views:	168 
Size:	186.2 KB 
ID:	11696
    Last edited by PumpkinEater; 10-07-2017 at 09:08 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts