defragster
Senior Member+
Wondering if moving is weakening SPI line connects - or inducing noise on them?
My two T_3.6 and T_3.1 are female headered and velcro'd together side by side with min length 1-2" wires. The T_3.6 & T_3.5 pair are still using cheap fixed 4" molded tip jumper wires but Velcro tied at USB cables - wires run around sides under breadboard clear of GPS & IMU, when I get back to it I'll cut minimal length wires like the other pair.
My two T_3.6 and T_3.1 are female headered and velcro'd together side by side with min length 1-2" wires. The T_3.6 & T_3.5 pair are still using cheap fixed 4" molded tip jumper wires but Velcro tied at USB cables - wires run around sides under breadboard clear of GPS & IMU, when I get back to it I'll cut minimal length wires like the other pair.