Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Cold start problem

  1. #1

    Cold start problem

    Our 3.2 Teensy does not cold start the first time it is powered below 40 Fahrenheit. Using the usb to power it. But after leaving it powered on for no more than a minute and cycling power it come up running. Repeatable with 2 boards. Any suggestions or reasons for this. I guess I need a one shot connected to the reset circuit pad to ensure it runs on power on.

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    6,860
    I wonder if it wakes up enough for a watchdog timer to kick in? Any useful notes here? Suggests that link was written and tested for a T_3.2.

    https://forum.pjrc.com/threads/25370-Teensy-3-0-Watchdog-Timer

    No idea given as to what is attached to it or how it is powered that might point to other things halting the startup - Just a bare T_3.2?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •