Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Best LCD to be used witn Teensy 3.2

  1. #1

    Best LCD to be used witn Teensy 3.2

    I would like some opinions and guidance for LCD's to be used with the Teensy. What are the easiest to implement, most versatile, etc.

    Currently I have hooked up a 128x64 LCD with only 4 pins, no resistors or pot required. Looks good, but may be a bit smaller than I want. it's only the .96 inch. But it works well.

    I have read that the 1602 can be used but requires some 1k resistors and a 10k pot to adjust the LCD.

    Any suggestions and/or links to read up are would be helpful.

    Thanks..

    Chris

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    5,183
    Color or monochrome? SPI or i2c? PJRC carries a 2.2 and 2.8" TFT with TOUCH that is very well supported in 240x320 pixels.

    I used a 1.44" 128x128 ILI9163C from Ebay that was nice and fast

  3. #3
    Quote Originally Posted by defragster View Post
    Color or monochrome? SPI or i2c? PJRC carries a 2.2 and 2.8" TFT with TOUCH that is very well supported in 240x320 pixels.

    I used a 1.44" 128x128 ILI9163C from Ebay that was nice and fast
    Monochrome is fine, but something like cyan on black or white on black. I currently have one of these hooked up and it works well, very fast.

    HERE


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •