I would like some opinions and guidance for LCD's to be used with the Teensy. What are the easiest to implement, most versatile, etc.
Currently I have hooked up a 128x64 LCD with only 4 pins, no resistors or pot required. Looks good, but may be a bit smaller than I want. it's only the .96 inch. But it works well.
I have read that the 1602 can be used but requires some 1k resistors and a 10k pot to adjust the LCD.
Any suggestions and/or links to read up are would be helpful.
Thanks..
Chris
Currently I have hooked up a 128x64 LCD with only 4 pins, no resistors or pot required. Looks good, but may be a bit smaller than I want. it's only the .96 inch. But it works well.
I have read that the 1602 can be used but requires some 1k resistors and a 10k pot to adjust the LCD.
Any suggestions and/or links to read up are would be helpful.
Thanks..
Chris