Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: IR Blaster difficulty?

  1. #1
    Junior Member
    Join Date
    Dec 2012
    Posts
    1

    IR Blaster difficulty?

    hey guy, looking at making the IR blaster specified in the projects list but ive never really done much project stuff exempt crimping network cables building my own pc and soldering

    the instructions dont seem all that solid but this seems a cheaper method then buying a USB-UIRT Just to control my TV and aircon via PC

    are there other instructions available? is it all that difficult?

  2. #2
    Senior Member
    Join Date
    Nov 2012
    Location
    Boston, MA, USA
    Posts
    1,114
    On the plus side, there is a github repository with the code.

    On the minus side, there is no schematic so you need to figure out the circuit from looking at the photo. For a first project, you might be better assembling the components on stripboard and using sockets to connect the Teensy to that, rather than the free-wiring approach shown in the photo.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •