SeekerOfKnowledge
Member
Good day people,
I'm seeking your advice regarding my project. I'm creating a digital sign using 3 64x32 rgb led matrices from https://www.adafruit.com/product/2279 to display messages and cool patterns, in addition i will use a teensy 3.1 micro controller to run it. The setup was taken from https://github.com/pixelmatix/SmartMatrix/blob/master/extras/hardware/SmartMatrixSD_V3.pdf and works successfully with 1 matrix, however my question is, is the teensy 3.1 powerfully enough to run 3 of them? Thank you in advance.
I'm seeking your advice regarding my project. I'm creating a digital sign using 3 64x32 rgb led matrices from https://www.adafruit.com/product/2279 to display messages and cool patterns, in addition i will use a teensy 3.1 micro controller to run it. The setup was taken from https://github.com/pixelmatix/SmartMatrix/blob/master/extras/hardware/SmartMatrixSD_V3.pdf and works successfully with 1 matrix, however my question is, is the teensy 3.1 powerfully enough to run 3 of them? Thank you in advance.