chandra2sekhar2000
Member
Hello paul,
i am using Teensy3.6 with PWMServo library. I am using Hitech High speed servo which needs 760uS to 1020uS, with 200 to 500Hz. standard servo PWM range of 1000 to 2000us,50hz wont work. How can i increase the PWMfrequency to 200hz from 50Hz. i think,Library still accepts input min & Max 760 to 1020. also I have few more issues associated with this Library
1. if i make a write call, will it keep generating the pulses continuously 50Hz or 200Hz rate or ,do i need to call the Write function every 1/50Hz ms?
2.I have a RPM read function which works on interrupt counting method.RPM counting worked well,after adding the PWMservo function calls, RPM function stopped working. Does interrupts gets disabled when PWMservo is used?
Thank u
with regards
Dr.N.Chandra sekhar,M.tech,Phd
i am using Teensy3.6 with PWMServo library. I am using Hitech High speed servo which needs 760uS to 1020uS, with 200 to 500Hz. standard servo PWM range of 1000 to 2000us,50hz wont work. How can i increase the PWMfrequency to 200hz from 50Hz. i think,Library still accepts input min & Max 760 to 1020. also I have few more issues associated with this Library
1. if i make a write call, will it keep generating the pulses continuously 50Hz or 200Hz rate or ,do i need to call the Write function every 1/50Hz ms?
2.I have a RPM read function which works on interrupt counting method.RPM counting worked well,after adding the PWMservo function calls, RPM function stopped working. Does interrupts gets disabled when PWMservo is used?
Thank u
with regards
Dr.N.Chandra sekhar,M.tech,Phd