Hi all, I am trying to read a 0 to 5V analog signal and I'm a little confused about the max voltage of the analog pins. I read that the Teensy is 5V tolerant on the digital pins and pins 14 to 23 and 26 to 31 have digital and Analog capabilities (A0 to A9 and A15 to A20). I also understand that the pure analog only pins A10 to A14 are 3.3V only. Does this mean I would need to put 5V on the AREF pin to read the full 5V range on A0-A9 and A15 to A20? Or should I stick to 3.3V on all pins to be safe?