Hi, I can't seem to get audio into teensy3.0. (analog pin A2)
Is the AudioInputAnalog object supported by teensy3.0?
I've created a custom pcb folowing the schematic presented in the GUI.
I have connected Agnd and ground (not sure why). Could that prevent the AudioInputAnalog object from working?
I'll try disconnecting the traces linking Agnd and Gnd or breadboarding a new input circuit,
but first wanted to check that is wasn't a teensy3.0 thing
For code I'm using this (pt8211 works fine)
// GUItool: begin automatically generated code
AudioInputAnalog adc1; //xy=272,262
AudioOutputPT8211 pt8211_1; //xy=534,301
AudioConnection patchCord1(adc1, 0, pt8211_1, 0);
AudioConnection patchCord2(adc1, 0, pt8211_1, 1);
// GUItool: end automatically generated code
Thanks in advance
Alex
Is the AudioInputAnalog object supported by teensy3.0?
I've created a custom pcb folowing the schematic presented in the GUI.
I have connected Agnd and ground (not sure why). Could that prevent the AudioInputAnalog object from working?
I'll try disconnecting the traces linking Agnd and Gnd or breadboarding a new input circuit,
but first wanted to check that is wasn't a teensy3.0 thing
For code I'm using this (pt8211 works fine)
// GUItool: begin automatically generated code
AudioInputAnalog adc1; //xy=272,262
AudioOutputPT8211 pt8211_1; //xy=534,301
AudioConnection patchCord1(adc1, 0, pt8211_1, 0);
AudioConnection patchCord2(adc1, 0, pt8211_1, 1);
// GUItool: end automatically generated code
Thanks in advance
Alex