I am having some trouble with serial communications both on a 3.6 and an LC while running macOS Sierra 10.12.4.
I am only receiving a few print statements at a time, even with a long delay. I originally suspected that something in my main project code was interfering with the USB connection, but even running a simple script with either board isolated on a breadboard has not resolved the problem.
I am sure that this is an issue with my machine, but I do not know how to resolve the issue. I read a few other posts with similar concerns but these were for other systems.
This is my code:
With a sample serial output:
This was all done with Teensyduino 1.41 (Arduino IDE).
Please let me know if any additional information would be helpful.
Thanks!
I am only receiving a few print statements at a time, even with a long delay. I originally suspected that something in my main project code was interfering with the USB connection, but even running a simple script with either board isolated on a breadboard has not resolved the problem.
I am sure that this is an issue with my machine, but I do not know how to resolve the issue. I read a few other posts with similar concerns but these were for other systems.
This is my code:
Code:
void setup() {
Serial.begin(9600);
Serial.println("Starting");
}
void loop() {
int x = 0;
while(true) {
Serial.println(x++);
delay(1000);
}
}
With a sample serial output:
This was all done with Teensyduino 1.41 (Arduino IDE).
Please let me know if any additional information would be helpful.
Thanks!