What Pins do I need in adding usb connector on Teensy 3.5??

[obiwan45]

What Pins do I need in adding usb connector on Teensy 3.5??

 

[KurtE]

Note: only the Teensy 3.6 has the second USB port, as you can see in the Teensy comparison document:
https://www.pjrc.com/teensy/techspecs.html

You might be able to use something like the USB Host shield product, which connects through SPI pins.

 

[obiwan45]

Note: only the Teensy 3.6 has the second USB port, as you can see in the Teensy comparison document:
https://www.pjrc.com/teensy/techspecs.html

You might be able to use something like the USB Host shield product, which connects through SPI pins.

I Found a way, the usb connector pins of Teensy 3.5 and it works.

These are :

Red = VUSB
Green = D+
White = D-
Black = GND