FPGA Based Project

[prophetsk91]

Hey guys need your help. I am currently working on a project that is a navigation system based on FPGA.
I am trying to connect the MPU 9265 IMU sensor to the board but am having no luck.
To be specific I can't find a reference code to make my own code accordingly.
The chip is using SPI protocols.
Any help in this method will be appreciated.
Also the FPGA is Xilinix Spartan XC3S500E.

 

[pictographer]

Try asking in the Xilinx forums. Also, you might find PicoBlaze useful. It is an 8-bit microcontroller that you can run in the Xilinx FPGA. Maybe you'll find it easier/quicker than VHDL or Verilog.

 

[brtaylor]

I have a MPU9250 library that works well:
https://github.com/bolderflight/MPU9250

Hope that helps! I don't have any experience with FPGA's though.

 

[prophetsk91]

I have a MPU9250 library that works well:
https://github.com/bolderflight/MPU9250

Hope that helps! I don't have any experience with FPGA's though.

I will try this thanks.

 

[prophetsk91]

yeah I read about this but FPGA in our project is compulsory.