Hi everybody,
I am pretty new in Teency world and I need a little help with my project.
I am trying to read data from an encoder on Teency 3.2 by means of a Dual Encoder Breakout
https://www.superdroidrobots.com/shop/item.aspx/dual-ls7366r-quadrature-encoder-buffer/1523/
I am using the sample code I have downloaded from here:
https://github.com/SuperDroidRobots/Encoder-Buffer-Breakout
but Teency 3.2 does not read any value.
The wires are connected as reported here:
https://www.pjrc.com/teensy/td_libs_SPI.html
that is:
MISO pin 12
MOSI pin 11
SCK pin 13
SS pin 10
I am thinking the library has blocked the pins in any way.
Any suggestions?
Thank you very much in advance!
Lorenzo
I am pretty new in Teency world and I need a little help with my project.
I am trying to read data from an encoder on Teency 3.2 by means of a Dual Encoder Breakout
https://www.superdroidrobots.com/shop/item.aspx/dual-ls7366r-quadrature-encoder-buffer/1523/
I am using the sample code I have downloaded from here:
https://github.com/SuperDroidRobots/Encoder-Buffer-Breakout
but Teency 3.2 does not read any value.
The wires are connected as reported here:
https://www.pjrc.com/teensy/td_libs_SPI.html
that is:
MISO pin 12
MOSI pin 11
SCK pin 13
SS pin 10
I am thinking the library has blocked the pins in any way.
Any suggestions?
Thank you very much in advance!
Lorenzo