Teensy C- SDR

Status
Not open for further replies.
S

star_light

New member
Hello,
I would like to get into the world of SDR, and have seen the Teensy C - SDR. Can a different codec be used with the Teensy module? Say for example TLV320AIC3204 which has an easy to solder pitch or am I restricted to SGTL5000?

Many thanks

/star_light
 
That depends on you. If you want a ready to use object with the audio library and the easy-peasy graphic GUI design tool, you’d have to stay with the codecs listed there. But if you want to use a non-supported (up to now) codec, nobody will hinder you from contributing your code to the audio library. :)
 
Theremingenieur said:
That depends on you. If you want a ready to use object with the audio library and the easy-peasy graphic GUI design tool, you’d have to stay with the codecs listed there. But if you want to use a non-supported (up to now) codec, nobody will hinder you from contributing your code to the audio library. :)
Click to expand...

Will this library do? https://github.com/chipaudette/OpenAudio_ArduinoLibrary

It does have a .h file for the TLV.

So if this is added to the .ino file in place of the SGTL? version and the calls are replaced as necessary would it be ok?

Thanks

/star_light
 
You are on the wrong path... Nobody mentioned the Open Audio Library for Arduino in this thread - Everything here is about the TEENSY audio library which comes with Teensyduino and which is documented on the PJRC website. Don't you read the documentation and data sheets before selecting components for a project?
 
Status
Not open for further replies.
Back
Top