Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Octows2811 adaptor and nrf24l01

  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    5

    Octows2811 adaptor and nrf24l01

    I'd like to use nrf24l01 alongside a teensy3.2 mounted on Octo adaptor. SPI pins are unfortunately not routed out to edge of Octo. What would be a good way to physically tap those spin pins for the radio? I don't want to create a flaky/messy system, and ultimately I'd like to wire up 50+ of these.

    Thanks for any soldering wiring tips!

    -Max

  2. #2
    Senior Member crees's Avatar
    Join Date
    Dec 2016
    Location
    Utah
    Posts
    145
    This board may have what you are looking for. http://megapixel.lighting SPI's are broken out on the comm module slot so its possible for you to make a simple daughter board with your nrf24l01. I also have both 5v and 3v headers with SPI etc on that slot. The pinout is for a w5200 Module (spi with 3v, Gnd Pins). the octo pins use the same level shifter IC and resistors for pixels.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •