Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 11 of 11

Thread: [posted] JD Teensy Breakout V1

  1. #1

    [posted] JD Teensy Breakout V1

    Just wanted to share a breakout board that I made:

    https://www.jeremydeprisco.com/jd-teensy-breakout-v1/

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    15,883
    Fun.

    Lots of 5V - VIN sensors?

  3. #3
    Potentially. It's sort of a blank slate for a number of different things. Wouldn't be appropriate for everything of course. But it is really helping me organize the layout of the project I am working on.

  4. #4
    Administrator Paul's Avatar
    Join Date
    Oct 2012
    Posts
    428
    Any chance for another photo... hopefully of this breakout board used to connect several sensors?

  5. #5
    Sure, Paul. See below. This is the project I built with it, though I have stepped away from it for a bit. There's also a 4th control (pot) not shown here.

    https://www.jeremydeprisco.com/wp-co...3-15.48.29.jpg

  6. #6
    Junior Member
    Join Date
    May 2017
    Location
    Atlanta, Georgia
    Posts
    12

    I'd like to buy some Rev 1.0 PCB's

    Quote Originally Posted by Shivasongster View Post
    Just wanted to share a breakout board that I made:

    https://www.jeremydeprisco.com/jd-teensy-breakout-v1/
    Where can I buy (or have made) 2+ of your Teensy Breakout PC boards?

    Thanks very much for making new Teensy prototype boards!!!

    JoeT

  7. #7
    Hey Joe,

    Thanks for writing.

    I only have one board in stock for sale, plus one left over for my personal use. I might be willing to let that one go too if you are really interested. After that, I am out.

    https://www.tindie.com/products/shiv...-breakout-v10/

    I'd need to check with my original supplier to see if they could work something out to ship more, possibly on demand. I hadn't planned on another run of these since demand was low, and I felt the board could use some tweaks first. Just haven't gotten around to it.

    Let me know your level of interest and we can talk off line.

  8. #8
    Hey Joe, I saw your order and have been trying to reach you. Please check your email.

  9. #9
    For anyone still interested, I am now out of stock here at home. I've moved this over to print on demand from PCBWay:

    https://www.pcbway.com/project/share..._c37ac634.html

    This should be much easier for everyone as they handle all the fulfillment needs.

  10. #10
    Junior Member
    Join Date
    May 2017
    Location
    Atlanta, Georgia
    Posts
    12
    Sorry I did not respond. Thanks for putting it up on PCBWay !!!

  11. #11
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    26,229
    This was posted on the PJRC website. Here's the link.

    https://www.pjrc.com/Jeremy+dePrisco...reakout-board/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •