Teensy 3.6 getting hot

Status
Not open for further replies.
J

Jachdich

Member
I have a teensy 3.6 and it's CPU is getting VERY hot for a mcu. (50-60C) I have soldered some wires to it, it was working for about 3 weeks until I put another wire on it. It worked the first few times, then got very hot. It responds to the computer for 5 seconds or so, and then seems to just shut off. I hope I haven't done any permenant damage to my teensy.

Has anyone else experianced these problems, and maybe know the cause?

Thanks in advance.
 
First thing is to unsolder all wires, cleaning everything up, and check again to see if it‘s the Teensy itself overheating or an external problem, i.e. a short circuit in the wiring or a solder blob.
 
Status
Not open for further replies.
Back
Top