I recently tried to upload to my Teensy 3.2 and got the dreaded “Teeny did not respond” message. I tried several Teensy’s all with the same result. Even the Examples “Blink” program won’t upload.
Under Tools in the menu I have:
Tools - Board: “Teensy 3.1”
Tools - USB Type: “Serial”
Tools - Port: “/dev/cu.RNBT-345C-RNI-SPP”
The only other port available is “/dev/cu,Bluetooth-Incomeing-Port”
I normally see something like “dev/cu.usbmodem1866971”
I’m on a Mac running macOS High Sierra v 10.13.5. there have been several updates lately.
Thanks!
Under Tools in the menu I have:
Tools - Board: “Teensy 3.1”
Tools - USB Type: “Serial”
Tools - Port: “/dev/cu.RNBT-345C-RNI-SPP”
The only other port available is “/dev/cu,Bluetooth-Incomeing-Port”
I normally see something like “dev/cu.usbmodem1866971”
I’m on a Mac running macOS High Sierra v 10.13.5. there have been several updates lately.
Thanks!