Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 6 of 6

Thread: Double Insulator Pins 0.1 inch 2.54 mm spacing,

  1. #1

    Double Insulator Pins 0.1 inch 2.54 mm spacing,

    This page

    https://www.pjrc.com/store/header_14x1_d.html

    confuses me. Title says 5 pins, order button legend says 5 pins, image shows 14 pins, which also makes sense.

    These would work for Teensy LC as well?

    Is there a 24pin version of this for Teensy 3.5/3.6? Not for Audio use, but to put a custom shield on top of a Teensy?

    If not - any 3rd party supplier? Where did you source these for PJRC?

    Thanks!

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    12,190
    Yes, that 14 pin double header would work the same of T_LC as it shares the same footprint for a custom shield.

    I don't see a similar 24 pin version at PJRC - but a pair of 14's should trim down usably.

  3. #3
    Administrator Robin's Avatar
    Join Date
    Oct 2012
    Location
    PJRC Global Headquarters
    Posts
    319
    Yeah, the description is bad. It was most likely copied from the 5x1-D headers that we have. I'll work on getting the bad info corrected.
    Despite what the description says, the part number is correct and there are 14 pins on this header. It works with the Teensy-LC and the Teensy 3.2. It also works to connect the Audio Shield and Octo Board to the Teensy 3.5 and Teensy 3.6 boards.

    We don't have a 24-pin version of this.... yet. We're looking looking at some options.

  4. #4
    Thanks - if you don't expect to to have 24-pin versions anytime soon, the suggestion to cut 14-pin down to 10-pin is a sensible one.

  5. #5

  6. #6
    Junior Member
    Join Date
    Jun 2018
    Location
    Virgin Islands
    Posts
    4

    Double Insulator Pins 0 1 inch 2 54 mm spacing

    Facebook post confirms double plat, my question is are we getting anything else with this or just double plat?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •