Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Use MKL26Z 32 VFT4 in place of the 64 for TeensyLC (until stock is back)

  1. #1
    Junior Member
    Join Date
    Jan 2013
    Posts
    12

    Use MKL26Z 32 VFT4 in place of the 64 for TeensyLC (until stock is back)

    Hello, Everyone. I'm working on a project which uses 19k of program space and 2.6k of dynamic memory. Do you think it will be easy to temporarily use the 32k/4k version of the KL26 with the teensyloader software and teensyLC modified custom programmer? Everyone is out of stock of the 64k/8k KL26Z.

    It's a small run project / really just a demonstration prototype with 4 to 8 units.



    Thank you.

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    18,328
    Email me directly. I have 6 pieces here on a cut tape. They're old but still in the opened tape, so should work and hopefully can get you past this roadblock.

  3. #3
    Junior Member
    Join Date
    Jan 2013
    Posts
    12
    Hey, thanks so much, Paul. I sent you a direct email. I was able to source some micros from NXP directly.

    Either way, so the smaller capacity MKL26Z32VFT4 would NOT work? Due how the micro uses rom?

  4. #4
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    18,328
    Quote Originally Posted by Finally_Joe View Post
    so the smaller capacity MKL26Z32VFT4 would NOT work?
    I really do not know. They might work. Might not.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •