AdmiralCrunch
Well-known member
Hi
It is now my first try to output the signals with midi.. but somehow I don't get it :/
I have set the Serial Port to "Serial" and run this sketch:
now in hairless-midiseria I can select Teensy USB-Serial (and route it to some Midi-IN/OUTs of my midi-interface)
.. I can see the MIDI-messages coming in..
when I now start Ableton, .. nothing happens.. in the midi-menu the ports I have selected to route usb-Serial in hairless-midi are orange, which seems not to mean someting good.
after a while hairless-midi crashes and wehen I restart it, it crahes immediately again.
when I close Ableton, I can start hairless-midi again and see the teensy is still sending ..
also when I start Ableton without hairless-midi running, nothing happens.. the ports of the midi-interface aren't orange anymore, but nothing is coming in(?)
... so I thought I try this usbMIDI-thing .. I set the serial-Port to "MIDI" and run this sketch:
now in hairless-midi the teensy-serial-port is gone.. but I can select "Teensy MIDI" from the ports to route to.. after a while I see signals here, too.
In Ableton I can see data incomind from "Teensy MIDI"-Device, too.
so far, so good..
but how would I get the data beeing send through MIDI-Out simultanously? .. I want to have
USB-MIDI, MIDI IN / OUT / THRU
does this MIDI/Usb thing conflict somehow? What USB-Type would I have to select then?
It is now my first try to output the signals with midi.. but somehow I don't get it :/
I have set the Serial Port to "Serial" and run this sketch:
Code:
#include <MIDI.h>
MIDI_CREATE_DEFAULT_INSTANCE();
void setup(){
MIDI.begin();
}
void loop(){
MIDI.sendNoteOn(50, 90, 1);
delay(1000);
MIDI.sendNoteOff(50, 0, 1);
delay(500);
MIDI.sendControlChange(16,23,1);
delay(500);
}
now in hairless-midiseria I can select Teensy USB-Serial (and route it to some Midi-IN/OUTs of my midi-interface)
.. I can see the MIDI-messages coming in..
when I now start Ableton, .. nothing happens.. in the midi-menu the ports I have selected to route usb-Serial in hairless-midi are orange, which seems not to mean someting good.
after a while hairless-midi crashes and wehen I restart it, it crahes immediately again.
when I close Ableton, I can start hairless-midi again and see the teensy is still sending ..
also when I start Ableton without hairless-midi running, nothing happens.. the ports of the midi-interface aren't orange anymore, but nothing is coming in(?)
... so I thought I try this usbMIDI-thing .. I set the serial-Port to "MIDI" and run this sketch:
Code:
void setup() {
}
void loop() {
usbMIDI.sendNoteOn(32, 127, 1);
delay(400);
usbMIDI.read();
}
now in hairless-midi the teensy-serial-port is gone.. but I can select "Teensy MIDI" from the ports to route to.. after a while I see signals here, too.
In Ableton I can see data incomind from "Teensy MIDI"-Device, too.
so far, so good..
but how would I get the data beeing send through MIDI-Out simultanously? .. I want to have
USB-MIDI, MIDI IN / OUT / THRU
does this MIDI/Usb thing conflict somehow? What USB-Type would I have to select then?