Hi,
I've struggled in the past days to get a SK6812 RGBW LED Stripe to work with Teensy 3.2.
My setup consists of a Leisure Battery (~12V) connected to a Daygreen 12/24V to 5V Converter and the attached circuit diagram.
Everything works fine. Just the 2 LED Stripes do not work as expected.
They LEDs do only glow white. No color change possible.
Strange enough, I'm able to sometimes control the number of pixel that do glow using NUMPIXELS.
I tested the stripes before and got the typical strandtest demo to work using the breadboard - so, yes they can change colors
Adafruit Neopixel Library is used like described here: http://forum.arduino.cc/index.php?topic=364208.msg2510420#msg2510420
As said I'm using the strandtest demo and just changed all occurrences of NEO_PIN to work with Teensy PIN 3.
Thanks
PS: There is only one Daygreen Converter, to not crossing to many wires and to make the picture easier to understand I was adding another one.
I've struggled in the past days to get a SK6812 RGBW LED Stripe to work with Teensy 3.2.
My setup consists of a Leisure Battery (~12V) connected to a Daygreen 12/24V to 5V Converter and the attached circuit diagram.
Everything works fine. Just the 2 LED Stripes do not work as expected.
They LEDs do only glow white. No color change possible.
Strange enough, I'm able to sometimes control the number of pixel that do glow using NUMPIXELS.
I tested the stripes before and got the typical strandtest demo to work using the breadboard - so, yes they can change colors
Adafruit Neopixel Library is used like described here: http://forum.arduino.cc/index.php?topic=364208.msg2510420#msg2510420
As said I'm using the strandtest demo and just changed all occurrences of NEO_PIN to work with Teensy PIN 3.
Thanks
PS: There is only one Daygreen Converter, to not crossing to many wires and to make the picture easier to understand I was adding another one.