luni
Well-known member
Can you give that one a try? https://github.com/luni64/VisualTeensy/releases/tag/0.8.4
> Executing task: C:/Users/user2/Documents/VisualTeensy_V0.84/make.exe uploadTy -j -Otarget <
process_begin: CreateProcess(NULL, \tyCommanderC upload bin\visual_teensy_testproj.hex --autostart --wait --multi, ...) failed.
make (e=2): The system cannot find the file specified.
make: *** [makefile:154: uploadTy] Error 2
The terminal process terminated with exit code: 1
#******************************************************************************
# Generated by VisualTeensy (https://github.com/luni64/VisualTeensy)
#
# Board Teensy 3.2 / 3.1
# USB Type Serial
# CPU Speed 96 MHz (overclock)
# Optimize Faster
# Keyboard Layout US English
#
# 10.11.2018 17:25
#******************************************************************************
SHELL := cmd.exe
export SHELL
TARGET_NAME := newProject
BOARD_ID := TEENSY31
LIBS_SHARED_BASE := C:\Users\lutz\Documents\Arduino\libraries
LIBS_SHARED :=
LIBS_LOCAL_BASE := lib
LIBS_LOCAL :=
CORE_BASE := C:\PROGRA~1\Arduino\ARDUIN~1.5\hardware\teensy\avr\cores\teensy3
GCC_BASE := C:\PROGRA~1\Arduino\ARDUIN~1.5\hardware\tools\arm
UPL_PJRC_B := C:\PROGRA~1\Arduino\ARDUIN~1.5\hardware\tools
UPL_TYCMD_B := C:\toolchain\TyTools
UPL_CLICMD_B :=
....
{
"folders":
[
{
"path": ".",
}
],
"build_systems":
[
{
"name":"Visual Teensy - Build",
"working_dir": "${project_path}",
"shell_cmd": "c:\\toolchain\\make\\make -f${project_path}\\makefile all",
"variants": [
{
"name": "Clean",
"shell_cmd": "c:\\toolchain\\make\\make -f${project_path}\\makefile clean",
},
{
"name": "Upload",
"shell_cmd": "c:\\toolchain\\make\\make -f${project_path}\\makefile uploadTy",
}
]
}
]
}
My Arduino installation is here:
D:\Dropbox\Arduino
So I edited VisualTeensy.exe.config as follows:
<setting name="arduinoBase" serializeAs="String">
<value>"D:\Dropbox\Arduino"<value/>
Since that edit, when trying to launch there is no error message but the application does not open either - nothing at all happens.
(Visual Studio Code is installed, as well as the C/C++ extension, and runs OK without VisualTeensy)
@luni: Pls can you point me to some instructions on how to set up the config file for non-standard installation locations, or advise on what else to try. Thanks.